For this I used a 10 foot piece of 1/2" PVC and a blow torch. I measured to find the middle of the pipe and heated that point, bending it till it was soft enough and got it to the right angle. i measured 10" from the point, heated that point and bent again, repeating that step for each point. I then put in screws about every inch around the star. When that was done i started with white lights weaving in and out of the screws alternating from one side of a point to the other side of the same point and went all the way around (100 ct strand was the perfect size for the complete star). I repeated wrapping with red and green lights. The star will be synced with the same colors of the mega tree.
